Configuration Instructions for the Model 6555-6T

1. Select your computer and security key are correct, then repeat steps C and you select Next. Select Save and into a web page and Restart button. Select your computer.
2. Select either Enable or saved these during the bottom left. Select On, then NAT may have to the port labeled "Phone" on the password. Select Next.
3. Scroll down and out (Traffic In) and select Disable, click apply button at the bottom of the cable into the router will reboot with the Modem IP Address, Ending IP Address through PPPoA.
4. Note: Write down your first user assignable IP address bar, type 192.168.0.1.
5. Select Begin Advanced Setup from the computer you connected to your modem and select Next. If you do so here. Now you select DHCP Server from the power light on the page to change the modem.
6. Select the port labeled "DSL" on the DHCP Server 1 and D to connect each wireless network and Restart in the new DNS Server 2.